INTER CAMBIADORES DE CARCASA Y TUBOS QVF® SUPRA
- Resistentes a la corrosión en el lado de fluido; hasta 6 barg en el lado de servicio -
- Resistentes a la corrosión en ambos lados hasta 3 barg -
- Aptos para la producción farmacéutica -
The QVF® coil heat exchangers can condense, vaporise and temper highly corrosive media between -80 and +200°C.
The QVF® SUPRA shell and tube heat exchangers are available with
- nominal diameters of DN80 to DN300
- heat exchange surfaces of 0.3m² to 27m²
- tubes made of borosilicate glass 3.3 or SiC
- shells made of borosilicate glass 3.3, glass-lined steel or stainless steel
- headers made of borosilicate glass 3.3, glass-lined steel or stainless steel
The standard models of the QVF® SUPRA shell and tube heat exchanger are designed for the condensation and tempering of highly corrosive substances between
- -20 and 150°C
- -1 bis +6 barg
Heat Exchangers
One-piece all-glass component without sealing points
QVF® coil heat exchangers made of borosilicate glass 3.3 are one-piece, as the coil is fused to the jacket and there is therefore no sealing point. Cross-contamination between the service medium and the product is therefore impossible. These all-glass heat exchangers can be ideally integrated into glass apparatus and are just as easy to operate and clean as the other components of the glass system. The pressure of the service medium can be a maximum of 3barg. The maximum pressure in the glass jacket depends on its diameter and corresponds to that of other glass components of the same nominal diameter. The maximum temperature difference between the service medium and the product is 180°C at a maximum of 200°C. The extremely smooth glass walls provide hardly any grip for possible contamination, so that the heat transfer remains constant over long periods of time. The QVF® coil heat exchangers are available in various designs from 0.03 to 15m² and are ideally suited for a wide range of processes such as temperature control, condensation and evaporation. If larger exchange surfaces are required or the pressure or pressure drop of the service medium in the coil is higher than 3barg, QVF® shell and tube heat exchangers are the right choice.
Características principales de los intercambiadores de calor de carcasa y tubos QVF SUPRA
- Corrosion and diffusion resistant materials
- For pressures up to +6barg
- Modular design catering for a wide range of heat transfer processes
- One tube diameter for all versions
- One tube fitting for all versions
- One PTFE tube plate for all versions of same nominal diameter
- FDA material certificates for all components that are in direct contact with the product
- Prevention of cross-contamination by means of optional intermediate chamber that can be drained separately
INTERCAMBIADOR DE CALOR DE CARCASA Y TUBOS
El sistema modular
Hasta DN300 con 27 m² de superficie de intercambio térmico
1 hasta +3 barg en el lado de proceso, +6 barg en el lado de servicio
Tubos de vidrio o SiC, carcasa de acero revestido de vidrio, vidrio o acero. Placa tubular y casquillos de sellado de PTFE.
Diseño cGMP opcional
You have question?
Our teams are ready to collaborate with you and provide solutions for your projects
Solicitar una descarga
Con el fin de procesar su solicitud de folleto de manera eficiente, le rogamos que nos facilite la información requerida a través de nuestro formulario.