Universal Dryers
Universal Dryer Advantages
The dryer can even be filled between 20-90% of total capacity and still retain optimal agitation, mixing and drying performance. Even with low rotational speeds allowing the dryer to be filled between 20-90% of total capacity and still retain optimal agitation, mixing and drying performance.
Universal Dryer Applications
The Universal Dryer is ideal for difficult drying processes that involve drying, mixing, milling,granulation, evaporation and/or crystallisation. Since the product area is completely contained, this product is appropriate for pharmaceutical intermediates and fine chemical applications.
Universal Dryer Features
The Universal Dryer features a horizontal construction with an integrated agitator/chopper system and full-area heating. A hydraulic, encased drive for the agitator and chopper ensure a consistently high torque, The hinged front door, which can be quickly and easily opened for inspection, provides access to the entire diameter of the cylinder.
Maximum heat transfer input to the product is achieved by heating the total vessel area and the agitator. A further advantage is the formation of an especially fine product powder in the dryer, which accelerates the heat transfer and thus the drying. The particle size of the product can be decrease further by the addition of a fixed stator to the agitator system.
Wet or dry chopping.
Wet or dry chopping with the chopper/stator combination can make further milling or sieving steps unnecessary. The wet milling reduces the thermal strain on the product. In addition, a good milling effect is often achieved with an appropriate grain size distribution. For products that are sensitive to high-shear agitation, the chopper can be removed quickly and easily.
Huge flexible degree of filling due to a high torque and a very good mixing effect of the agitator/chopper system.
Hydraulic drives for the agitator and chopper ensure a consistently high torque, even with low rotational speeds. Therefore the dryer can be filled between 20-90% of total capacity whilst retaining optimal agitation, mixing and drying performance. This huge degree of flexibility makes it possible to dry batch sizes that have greatly varying volumes and products that have greatly varying physical characteristics. Regardless of whether you have suspensions, solutions or filter-moist products – lumpy transition phases in which the agitator and chopper require more power can be easily overcome.
Agitator to wall clearance prevents crust formation and product overheating
The special construction of the agitator (results in a typical wall clearance of 2-5 mm) therefore the entire interior surface of the dryer is evenly coated. Crust formation is therefore absolutely minimised and heat is applied evenly to the product during the entire drying process. Since the agitator is supported at both ends of the shaft, it results smaller wall clearances than those in spherical and pan dryers can be achieved whilst maintaining the very high agitator torque!
- Special version.
- Standard Dryer with three-arm agitator instead of chopper.
- Easy inspection through the front door.
The hinged front door, which can be quickly and easily opened for inspection, provides access to the entire diameter of the cylinder. The agitator is held in place by the main bearing.
Important advantages summarised:
- Chopper integrated in the agitator arm.
- Reliable lumpbreaking.
- Small particle / grain size.
- Wet and dry milling.
- Drying independent of the initial product consistency.
- Small agitator to wall clearance.
- Hinged door for easy inspection.
- Full-surface heating of the agitator and vessel.
- High torque means maximum filling volume.
- Complete encasing of the drive system.
- Single-nozzle device on the agitator for applying
- Nitrogen or liquids for granulation.
- Pilot scale trials can be conducted in the Rosenmund technical centre.